HCR 2 Gameplay Guides & Tips

Hill Climb Racing 2 Controls Explained: Pedals, Flips & Special Moves

Whether you’re a brand-new driver just getting behind the wheel or a seasoned racer looking to squeeze every last millisecond out of your runs, understanding Hill Climb Racing 2 controls is absolutely essential. The game looks simple on the surface — two pedals, a quirky vehicle, and a bumpy hill — but beneath that charming exterior lies a surprisingly deep control system that rewards mastery in a big way.

In this guide, we’ll break down every aspect of how the controls work, from the basic gas and brake pedals to mid-air flips and advanced special moves tied to specific vehicles. By the time you finish reading, you’ll have a much clearer picture of how to control Hill Climb Racing 2 like a true professional.

The Basics: Gas and Brake Pedals

At its core, Hill Climb Racing 2 gives you two on-screen buttons: the gas pedal on the right and the brake pedal on the left. This minimalist setup is intentional — it keeps the game accessible while hiding layers of complexity that only reveal themselves as you progress.

Gas Pedal (Right Button)

Pressing and holding the gas pedal accelerates your vehicle forward. Simple enough, right? But here’s the key insight most beginners miss: the gas pedal also affects your vehicle’s rotation when you’re airborne. When you’re in the air, holding gas will tilt your vehicle forward (nose down), and releasing it will allow the rear to drop. This makes the gas pedal your primary tool for controlling flips and landing angle.

Brake Pedal (Left Button)

The brake pedal does more than just slow you down on the ground. In the air, pressing the brake tilts your vehicle backward (nose up). This is how you execute backflips and recover from dangerous nose-dives. Skilled players use a combination of gas and brake inputs mid-air to rotate their vehicle to exactly the right angle before touching down.

Using Both Together

Pressing both pedals simultaneously on the ground activates your brakes while also revving the engine. This can be useful for maintaining your position on a steep incline without sliding backward. On certain vehicles, this dual-input can also prime certain special abilities, which we’ll cover later.

Understanding Air Control in Hill Climb Racing 2

Air control is where the skill ceiling in Hill Climb Racing 2 really starts to climb. When your vehicle goes airborne — whether off a jump, a hill crest, or a bumpy patch of terrain — you enter a physics-driven rotation system that you can directly influence through your pedal inputs.

Forward Rotation (Gas in Air)

Holding gas while airborne rotates your vehicle in a forward direction. If you’re going off a ramp and need to keep your nose level or tilt it downward for a smooth landing, the gas pedal is your go-to. Over-rotating forward, however, will send your vehicle crashing nose-first into the ground — a common cause of crashes and wasted time.

Backward Rotation (Brake in Air)

Holding brake while airborne rotates your vehicle backward. This is how you execute clean backflips, which are one of the best ways to earn coins and crowd cheers during races. Timing is everything — you need enough air time to complete the rotation and enough control to land squarely on all wheels.

The Air Control Tuning Part

Here’s something many players overlook: the air control tuning part is an upgradeable component in certain vehicles that directly improves your mid-air maneuverability. When you upgrade your air control, the responsiveness of your vehicle’s rotation in the air improves noticeably. This means faster flips, more precise landing angles, and greater overall control during long aerial sequences.

Investing in the air control tuning part early is often overlooked in favor of engine power or suspension, but for stages with lots of jumps and big air moments, it can make a transformative difference. If you’re struggling with crash landings on hilly stages, check whether you’ve upgraded this component before blaming your reflexes.

Flips: Frontflips, Backflips & Combos

Flips are one of the most exciting elements of Hill Climb Racing 2 controls. They reward risk-taking with coins and look spectacular when pulled off cleanly. Here’s how to execute each type:

Backflip

Launch off a ramp or hill, then hold the brake button throughout your airtime. Your vehicle will rotate backward. Time it so that all four wheels (or two, depending on your vehicle) contact the ground in a stable landing position. A clean backflip earns you bonus coins. String multiple backflips together on a stage with repeated big jumps and you’ll rack up coins quickly.

Frontflip

Hold gas throughout your airtime after a launch. The vehicle rotates forward. Frontflips are harder to land cleanly because the forward momentum of your vehicle compounds with the rotation, making it easier to over-rotate. Practice on stages where you have a gentle slope to land on rather than a flat surface.

Double and Triple Flips

With enough air time — achievable with powerful engines, upgraded suspensions, and the right ramp angle — you can string together double and even triple flips. These require fast rotation (hence the value of upgrading the air control tuning part) and very precise landing timing. They’re satisfying, profitable, and extremely impressive in multiplayer races.

Special Vehicle Moves Explained

Beyond the standard two-button setup, many vehicles in the game come equipped with special vehicle moves — unique abilities that are activated through specific input patterns. These abilities add a whole new dimension to how to control Hill Climb Racing 2 and often define competitive strategies at higher levels of play.

Boost and Nitro Vehicles

Some vehicles feature a built-in nitro or boost system. These are typically activated by a timed double-tap of the gas pedal or by holding both pedals briefly before releasing. The boost gives you a surge of speed, perfect for clearing difficult obstacles or gaining separation from opponents in multiplayer.

Jumping Vehicles

Certain vehicles can execute an active jump — a mechanic that goes beyond passive air from hills. By pressing both pedals simultaneously at the right moment, these vehicles launch upward, allowing you to clear obstacles or gain extra air for flip attempts.

Stabilization and Hover Abilities

A handful of vehicles have hover or gyroscopic stabilization features that activate when you hold both pedals in the air. Rather than rotating freely, these vehicles lock into a more stable orientation, making landings almost automatic. If you’re newer to the game and struggling with flips, these vehicle types can serve as excellent training wheels.

To discover all the special moves a particular vehicle offers, check the vehicle’s detail page in the garage. Experimenting on a low-stakes stage is always a good idea before taking special move strategies into competitive multiplayer. For more in-depth strategies and resources, Hill Climb Racing 2 fan communities are an excellent place to start.

Pro Tips for Mastering Controls

Now that you understand the mechanics, here are some actionable tips to level up your control skills quickly:

  • Practice on low-risk stages: Before testing advanced flips in multiplayer, use single-player adventure stages to build muscle memory.
  • Upgrade air control early: The air control tuning part pays dividends in nearly every stage that involves jumps.
  • Watch your landing angle: A flip executed perfectly but landed at a bad angle will still crash. Focus on the landing as much as the rotation.
  • Use the brake to recover: If you’re nose-diving after a bad jump, a quick brake tap can sometimes save you from a crash.
  • Match your vehicle to the stage: Some vehicles have control schemes better suited to specific terrain types. Don’t force a heavy truck onto a flip-heavy course.
  • Learn your vehicle’s weight: Heavier vehicles rotate more slowly in the air. Adjust your input timing accordingly.

Frequently Asked Questions

What are the basic Hill Climb Racing 2 controls?

The game uses two on-screen buttons: the gas pedal (right) to accelerate and rotate your vehicle forward in the air, and the brake pedal (left) to slow down and rotate your vehicle backward in the air. These two inputs handle everything from basic driving to complex flip maneuvers.

How do I do a backflip in Hill Climb Racing 2?

To execute a backflip, get airborne off a ramp or hill and hold the brake pedal while in the air. Your vehicle will rotate backward. Time your landing so all wheels touch down smoothly. Upgrading your air control tuning part will make this easier to control.

What does the air control tuning part do?

The air control tuning part is an upgradeable component that improves your vehicle’s rotational responsiveness while airborne. A higher-level air control upgrade means faster, more precise flips and better ability to correct your angle before landing.

How do I activate special vehicle moves?

Special vehicle moves vary by vehicle type. Common activation methods include double-tapping the gas for nitro boosts, pressing both pedals simultaneously for jumps or stabilization, or holding specific input combinations mid-air. Check your vehicle’s garage page for details on its unique abilities.

Is it possible to control the game with physical buttons or a controller?

Hill Climb Racing 2 is primarily designed for touchscreen play on mobile devices. While some third-party setups may allow for controller input depending on your device, the game’s official control scheme relies on the two on-screen touch buttons. Most competitive players use touchscreen controls exclusively.

Disclaimer: This is an unofficial fan site and is not affiliated with, endorsed by, or connected to Fingersoft, the developers of Hill Climb Racing 2. All game-related content is created for informational and entertainment purposes only.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *